Ledge Pull

Beautiful and high quality

THESE ARE THE BEST LEDGE PULLS I'VE FOUND SO FAR. THEY ARE THICKER THAN MOST.

These pulls were exactly what we wanted for our office kitchenette; sleek, unobtrusive but still substantial and the pricing was unbeatable.

We were very pleased all-around with the product. The finish is very classy with a nice smooth texture and nice matte finish. I was a bit concerned after reading older reviews about the screws provided to install the pulls knowing they are easily visible on the top of lower drawers. However, Schoolhouse seems to have made a change and improved the screws. I cannot confirm this but I had a smooth experience installing the pulls. I used a 3/32" drill bit to pilot drill the holes and did not have any issues with breakage or stripping. I did hand tighten a few but was not necessary for most. I installed 24 pulls in about 2 hours while doing some light computer work. Overall, would recommend this product. Our flat panel cabinets with these ledge pulls look beautiful and achieved the look we were going for.

love these pulls.

These pulls were a great quality. I also needed customer service and Brian went above and beyond to help me. I would not hesitate to purchase from this company. Thank you and it was great doing business with you.

Beautiful product and excellent service!

I installed these pulls 1 year ago in my kitchen drawers and they are beautiful and sturdy. The only thing that is causing me problems is that wherever I have more than 3 drawers, the pulls are grazing the drawer above because they are thick. Keep that in mind if you are installing multiple drawers, you have to have enough gap between each drawer to account for the thickness of the pulls. I can't create any bigger gaps in my semihandmade drawer fronts. After living with them for a year I just can't deal with the grazing every time I close my drawers so I am replacing the top 1 - 2 drawers with the brass dish knob pulls. I hope that it will still look nice even if I am mixing the knobs and pulls on only some of the drawers. Other than that I love the pulls and they are well made.

Great quality pull with a couple exceptions from the aspect of a furniture maker. One is the length is inconsistent to about 1/32" per pull. That makes it hard to install them in batches when insetting them into drawer fronts. Second the screws are small, prone to breakage, and not as refined as the pulls themselves often sitting a bit proud of the countersink of the pull. If these two things could be fixed they'd be 5 stars all around.

Beautiful solid brass top mount pulls, heavy duty and accurately sized. Had the first couple of screws snap off upon install.. even with a pilot hole drilled and hand screwed. Ended up buying and using different screws and did not have that problem.

I purchased it for a cabinet drawer. Look and feel is high quality but the screws included are pure garbage. I read reviews of other customers having this very issue so I took a lot of care finding the right size bit for the holes and hand tightening the screws carefully. Low and behold, screw heads were snapped off so easily I couldn’t believe it. I had to drill out the remaining screw out of the hole and use different screws. It was such a pain and disappointment. If customers are taking their time writing reviews to let you know of an issue, the least thing you can do is address it by using different type or size screws or at least provide some disclosure.